Differences

This shows you the differences between two versions of the page.

--- software:zoneminder:picamera [2021/06/02 16:28] – rodolico
+++ software:zoneminder:picamera [2025/04/15 15:53] (current) – rodolico
@@ Line 7: / Line 7: @@
 Anyway, no GUI needed, so I did the Raspberry Pi OS Lite (https://www.raspberrypi.org/software/operating-systems/) and set it up, then did the following. Ended up with a pretty decent camera that is not "phoning home" with all your images.
-Following assumes you have raspian installed on a Pi with a camera attached.
+===== Get raspbian image onto SD =====
-===== Install v4l2rtspserver on camera =====
+  - Download the Lite version of Raspbian from [[https://www.raspberrypi.org/downloads/raspbian/]]
+  - write the downloaded image to the micro-sd (do not uncompress)
+  - mount /boot from SD onto /mnt
+<code bash>
+touch /mnt/boot/ssh # enable ssh
+# only do the following if you need wifi. Change country code, ssid and psk for your system
+# see [[https://www.raspberrypi.org/documentation/configuration/wireless/headless.md]]
+cat <<EOF >/mnt/boot/wpa_supplicant.conf
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
+update_config=1
+country=<Insert country code here>
+network={
+ ssid="<Name of your WiFi>"
+ psk="<Password for your WiFi>"
+}
+EOF
+</code>
+Insert SD into your Pi and boot up.
+===== Configure Raspberry Pi =====
+Enable wlan by adding the following to /etc/wpa_supplicant/wpa_supplicant.conf
+<file>
+country=US
+network={
+   ssid="your ssid"
+   psk="your psk"
+}
+</file>
+Now, do the install
 <code bash>
+# Set up Camera
+raspi-config # go to Interface, and enable camera
+reboot
+ls -lh /dev/video*
+raspistill -v -o test.jpg # Verify camera works
+# Remove Swap File
+sudo systemctl stop dphys-swapfile.service
+sudo systemctl disable dphys-swapfile.service
+sudo systemctl mask dphys-swapfile.service
+sudo rm /var/swap
+# add zram for swap
+sudo apt-get install zram-tools
+sed -i 's\.*ALLOCATION=.*\ALLOCATION=100\g' /etc/default/zramswap
+sudo systemctl enable zramswap
+sudo systemctl restart zramswap
+# Set up ntp
+sudo apt-get install ntp
+sudo timedatectl set-timezone America/Chicago
+# add base packages needed
+sudo apt install \
+liblivemedia-dev liblog4cpp5-dev libasound2-dev git gdebi-core cmake build-essential v4l-utils
+# get and build v4l2...
 git clone https://github.com/mpromonet/v4l2rtspserver
 cd v4l2rtspserver
@@ Line 17: / Line 69: @@
 make
 sudo make install
-</code>
+# do the install
+sudo gdebi v4l2rtspserver-0.2.0-6-g3542b6f-Linux-armv6l.deb
-<code conf v4l2rtspserver.service>
+# create systemd module
+cat <<EOF >/etc/systemd/system/v4l2rtspserver.service
 # systemd configuration for v4l2rtspserver
 # /etc/systemd/system/v4l2rtspserver.service
 [Unit]
 Description=v4l2rtspserver rtsp streaming server
 After=network.target
 [Service]
 #ExecStartPre=/usr/bin/v4l2-ctl --set-ctrl vertical_flip=1
 ExecStartPre=/usr/bin/v4l2-ctl --set-ctrl h264_i_frame_period=5
-ExecStart=/usr/local/bin/v4l2rtspserver -F 5 -W 640 -H 480
+ExecStart=/usr/local/bin/v4l2rtspserver -F 5 -W 1280 -H 720
 #ExecReload=/bin/kill -HUP $MAINPID
 Type=simple
@@ Line 36: / Line 89: @@
 Group=video
 Restart=always
 [Install]
 WantedBy=multi-user.target
+EOF
+# enable the service
+sudo systemctl enable --now v4l2rtspserver.service
 </code>
-<code bash>
+At this point, you should be able to get an rtsp by pointing vlc to [[rtsp://{pi zero ip}:8554/unicast]]
-systemctl start v4l2rtspserver
-</code>
 ===== Zoneminder Configuration =====