Unix Server Tech Knowledge Base

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== KVM on personal workstation ======

===== Discussion =====

WARNINIG: I'm still writing this, and most of it is coming off my (fallible) memory, so be careful if you use this before I've tested everything. I'll remove this warning when I have tested.

I have had great success with KVM on a workstation. If you like GUI's, virt-manager takes some of the pain out of learning a new system, at the loss of some capabilities. However, I was able to get very good response on an older Dell Inspiron 23 with 8G of RAM and a 4 core i5. I was able to run Windows 10, Windows 7, FreeBSD and a Devuan workstation on them (one at a time) and get very good response most of the time.

On my Lenovo ThinkStation D30, 32G RAM and 8 core Xeon E5-2637, I run multiple virtuals at the same time, depending on what I need.

In this case, want the virtuals visible on the LAN, so I set up a bridge for them and let them get their IP's from the LAN's DHCP server. However, on my laptop, which may not have a network connection, I use the internal NAT.

===== Installation =====

First, install the necessary Devuan packages. I always do my installation as the root user, so you won't see 'sudo' before any of the commands:
<code bash>
apt install bridge-utils qemu-kvm qemu-system-common qemu-system-x86 qemu-utils virt-manager virt-top virt-viewer virtinst xrdp xtightvncviewer libvirt-clients libvirt-daemon-system
</code>

Now, build out the network using a bridge (don't do this if you're going to use virt-manager's NAT). Edit /etc/network/interfaces. I put the whole file here, so you can just move the old one and create a new one with the contents.
<code bash interfaces>
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
iface eth0 inet manual
iface eth0 inet6 manual

#set up bridge and give it a static ip
auto br0
iface br0 inet dhcp
        bridge_ports eth0
        bridge_stp off
        bridge_fd 0
        bridge_maxwait 0
</code>

===== Usage =====


virt-manager has a nice little GUI interface to running virtuals, but I prefer to connect to them using xtightvncviewer or rdesktop, so I install those.

<code bash>
apt install xtightvncviewer rdesktop
</code>

==== Windows Virtuals ====
On my Windows virtuals, I simply turn on Remote Desktop ('pro' version or above). I wrote a little script that I can run with some defaults I like, so I just call it with either the IP or the DNS name:
<code perl rdesktop.pl>
#! /usr/bin/env perl

use warnings;
use strict;

# these will be available to the Windows machines as network shares. The key
# is the name as seen by the Windows machine, the value is the actual path.

my %shares = ( 'home' => '/home/me', 'installs' => '/map/to/some/other/share' );

my $target = shift or die "Usage: $0 hostname\n";
my $resolution = shift; $resolution = '1680x1050' unless $resolution;
# build my command
my $command = "/usr/bin/rdesktop -g $resolution -P ";
foreach my $share ( keys %shares ) {
   $command .= "-r disk:$share='$shares{$share} ";
}
$command .= $target;
# and execute it
qx/$command/;
</code>

Just call it as <code bash>./rdesktop.pl targetname [resolution]</code> and the session is set for your machine.

==== Unix VNC Targets ====

Again, I have a quick and dirty script that I use to connect.
<code perl connectVNC>
#! /usr/bin/env perl

use warnings;
use strict;

my $target = shift  or die "Usage: $0 hostname [port]\n";
my $port = shift; $port = 5900 unless $port;
`vncviewer -compresslevel 6 -encodings "copyrect tight hextile zlib corre rre raw" -quality 5 $target:$port`;
</code>

Call it with ./connectVNC ip.or.dnsname 5900

For Linux, there is a cute little script that works well that you can install on the target virtual. I'll include it here later.